our promaster conversion journey
There are 4 overhead LED puck lights in the ceiling controlled by a dimmer on the side of the galley wall in the electrical control spot.
Here you can see the dimmer on the right and the 110v and 12v distribution outlets. There’s also the victron battery monitor.
Under the overhead cabinet is the galley counter lighting. The dimmer mounted right to the bottom of the cabinet!
Full bright
Dimmed
Here are the rear bed reading lights. You just press the front of the light to click them on and off.
After 2 years of use we decided that having just an electric heater was not working for us. We found too many times we didn’t have shore power hookups but needed a bit of heat. After reviewing the options I decided on the Espar B4L M2 heater. Features included: Runs on Petrol (regular Gas for
Read More
When opening the kitchen storage cabinet I found it was quite dark in there. Also I have a hidden storage pit that is also quite dark, so I added a LED light to the top and put it on a door activated microswitch. Problem solved!
Read More
The one storage spot under the counter in the kitchen area needed a bit of structure to help organize it. I made one section that has a grid to store pint jars and then one that fits on top of that which is more just an open bin. These are sized to just fill the
Read More
I finally got around to installing some wheel arch covers. I had put foam / aluminum duct insulation over the wheel arches, but always felt like it wouldn’t hold up over time with things banging around in the storage lockers. These ABS covers from Legend worked out great to just fit over the existing foam.
Read More